plumbingsniper 
R-22 and R-410A are two distinct types of refrigerants used in air conditioning systems, and they differ significantly in terms of composition, environmental impact, and compatibility with equipment: R-22 (Freon) R-410A R-22 vs R-410A Can You Put R-22 in an R-410A System? Unfortunately, you can’t simply add R-410A in an air conditioners that was designed … Read more
Central air conditioning and ductless mini-split systems are two distinct types of cooling systems with several key differences: 1. Distribution Method 2. Installation 3. Cost 4. Zoning 5. Aesthetics 6. Maintenance 7. Heating Capability Pros and Cons of Ductless Mini-Splits Pros and Cons of Central Air ACs Central Air Vs Ductless Mini-Splits Air Conditioning Systems … Read more
Does Freon Have a Taste or Smell? In air conditioning or refrigeration, Freon (a refrigerant) moves within a closed-loop system where it changes from gas to liquid and back to gas again and in the process remove heat from where it is not needed In air conditioners specifically, Freon moves from the compressor to the … Read more
Hydro jetting, snaking, and rodding are three common methods used to clear clogged drains and sewer lines. Each method has its pros and cons. Here’s a summary comparing the pros and cons of hydro jetting against snaking and rodding: Hydro Jetting Hydro jetting is a high-pressure plumbing and drain cleaning technique used to clear clogs, … Read more
Descaling or removing calcium buildup from pipes is essential to maintain efficient water flow and prevent damage to your plumbing system. Here’s a summary of how to descale or remove calcium buildup from pipes: Materials and Tools Needed Step-by-Step Guide How to Get Rid of Calcium Build-Up/Limescale from Inside Pipes The main sign that your … Read more
Replacing pipes in your home is a significant undertaking, but it’s essential to do so when necessary to avoid potential water damage and health risks. Here’s a summary of tell-tale signs that indicate it’s time to replace your pipes: How Do I Know When to Replace My Pipes? The following are the signs that you … Read more
Water pressure describes how hard water is flowing out of a pipe in pounds per square inch (psi) while flow rate describes how much water is flowing out of the pipe, in gallons per minute (GPM). Water Pressure Flow Rate Relationship Water Pressure vs Flow Rate Pressure is defined as the continuous physical force exerted … Read more
PVC (Polyvinyl Chloride) and uPVC (Unplasticized Polyvinyl Chloride) are two common types of plastic pipes used in plumbing and construction. Here’s a summary of the differences, pros, and cons between PVC and uPVC pipes: Differences Pros and Cons PVC Pipes Pros: Cons: uPVC Pipes Pros: Cons: Which is Better, PVC or UPVC? I must start … Read more
PVC (polyvinyl chloride) is a thermoplastic that is molded into different shapes and sizes to form pipes and fittings. It is cheaper and more effective to use compared to steel or copper. Closely related to PVC is CPVC (chlorinated polyvinyl chloride). CPVC is basically a PVC homopolymer that has undergone a chlorination process to improve … Read more
The U-shaped pipe under your sink is known as a “P-trap” or “sink trap.” Its primary purpose is to prevent foul odors and harmful sewer gases from entering your home through the kitchen or bathroom drain. The P-trap achieves this through a simple design: Why You Need a P-trap To understand why a P-trap is … Read more